Week 5 - Tidy solution




OmniVESA details can be found at: https://shop.pimoroni.com/products/omnivesa



I am grateful to Santander UK for the funding; CBiS Education for their support and advice so far; last but not least the schools who have enthusiastically expressed an interest in taking part. All views are the authors.

Comments

Post a Comment

Popular posts from this blog

Wellingborough School joins Robots in Schools project

Another school, Wellingborough School, joins the Robot in Schools project If you have two you can program a 'robot fight'. https://t.co/OTNtlcOzXP — 💻🖥️💾 TeCoEd 💾🖥️💻 (@Dan_Aldred) January 13, 2019 Related Links - Home page of the Project  https://robotschools.blogspot.com/2016/06/start-of-project.html - Link to the  School . I am grateful to Santander UK for the funding; CBiS Education for their support and advice so far; last but not least the schools who have enthusiastically expressed an interest in taking part. All views are the authors.
Read more

CBiS Education Cardboard2Code Module 1

Image
CBiS Education Cardboard2Code Module 1 : Cardboard robot arm. To find out more go to:  http://www.cbis.education/cardboard2code_module1 'via Blog this' All opinions in this blog are the Author's and should not in any way be seen as reflecting the views of any organisation the Author has any association with. Twitter @scottturneruon
Read more

USB Robot arm control with Python and Raspberry Pi

Image
I was asked recently if the USB robot arm could be programmed - I knew the answer was yes. The Arm came from the CBiS Education Robot Arm kit ( http://www.cbis.education/Product-Details.aspx?prodid=2  ) which comes with a Raspberry Pi and SD Card with software to control the Arm. So the question has become -  How do I program it in Python from scratch ? Well, the honest answer is I don't I use what others have done before. A good  starting point is this site  http://www.wikihow.com/Use-a-USB-Robotic-Arm-with-a-Raspberry-Pi-(Maplin) , it gives most (pretty much all) of the answer, including where to get the pyusb library need; setting it up (be careful don't use the  zip file but the tar.gz version  - you might need to scroll down the screen to do this) and an example. A second source that was very useful  was   http://notbrainsurgery.livejournal.com/38622.html?view=93150#t93150  which contains an explanation of the 'triples' (for example  [32,0,0] ) used to select w
Read more